2020 John Deere W48R

Selling Price -

$4,800.00

Information

  • Width:48 in
  • Engine Type:Gas
  • Drive Type:Hydro
  • Description: 48" Deck; Gas Engine; Hydrostatic Transmission

Photos

Highlights

  • $4,800.00
  • DURANT
  • Pre-Owned
  • 140513
  • 2020
  • John Deere
  • W48R
  • 1TCW48RALLT020270
  • 19
  • 100
  • Two Hydro-Gear, 0.73-cu in. (10-cc) hydraulic pumps and Danfoss 12 cu-in. (197-cc) wheel motors and ergonomic handles with spring loaded neutral lock
  • Gasoline
  • Available
  • Deflector down: 62 in. (157 cm) | Deflector up for storage: 50 in. (127 cm)
  • 44.8 in. (114 cm) | Cutting: 1.5-4.5 in. (3.8-11.4 cm) / 48 in. (122 cm)

Specifications

  • 2020
  • John Deere
  • W48R
  • Base
  • Walking
  • Model: FS600V - California Air Resources Board (CARB) compliant
  • At 3600 rpm: 18.5 hp (13.8 kW)
  • 36.8 cu in. (603 cc)
  • V-twin
  • Electronic
  • Electric start
  • Full pressure
  • Air cooled
  • Paper element with foam precleaner
  • Pump: Vacuum-operated diaphragm | Delivery: Carburetor | Pickup: Top draw
  • Gasoline
  • Shift mechanism: Ergonomic handles with spring-loaded neutral lock
  • Two Hydro-Gear, 0.73-cu in. (10-cc) hydraulic pumps and Danfoss 12 cu-in. (197-cc) wheel motors and ergonomic handles with spring loaded neutral lock
  • Dynamic braking with hand controls, hand lever to set parking brake
  • Motors: Danfoss 12 cu in. 197 cc
  • Operator presence starting system: PTO off, park brake engaged, speed lever in neutral
  • 3,600 rpm | Range Forward: 0-7.5 mph (0-12.1 km/h) / Reverse: 0-3 mph (0-4.8 km/h) | Blade: Approximately 18,000 fpm (5,486 m/min)
  • Thickness: 0.25 in. (0.64 cm)
  • 44.8 in. (114 cm) | Cutting: 1.5-4.5 in. (3.8-11.4 cm) / 48 in. (122 cm)
  • 16.5 in. (41.9 cm) | with deck: 74 in. (188 cm)
  • Deflector down: 62 in. (157 cm) | Deflector up for storage: 50 in. (127 cm)
  • Tank: 5.4 U.S. gal. (20.4 L)
  • 669 lb (303 kg)
  • Valving: Overhead valves | Governor: Flyweight all speed governor | Hourmeter: Standard, digital | Muffler: Low tone | Blades: Three high-lift | Blade drive: V-Belt
  • 10-gauge, 0.14-in. (3.42-mm) fabricated steel deck top with added 10-gauge, 0.14-in. (3.42-mm) spindle mounting plate, 7-gauge, 0.19-in. (4.8-mm) side skirts with reinforcement bar
  • A used warranty may be available. Contact dealer for details.