2018 John Deere Z920M 48

Selling Price -

$4,845.00

Information

  • Width:48 in
  • Engine Type:Gas
  • Drive Type:2WD
  • Description: 2018 John Deere Z920M, 48 inch deck

Photos

Highlights

  • $4,845.00
  • DURANT
  • Pre-Owned
  • 143238
  • 2018
  • John Deere
  • Z920M 48
  • 1TC920MAEHX060069
  • FX730V
  • 23
  • 875
  • Hydrostatic
  • Gasoline
  • Available
  • With chute down: 62 in (157 cm)

Specifications

  • 2018
  • John Deere
  • Z920M
  • 48
  • Riding
  • FX730V
  • At 3,600 rpm, 23.5 hp (17.5 kW)
  • 44.3 cu in. (726 cc)
  • Two
  • Full flow, replaceable
  • Full pressure
  • Air
  • Pre-cleaner, Yes, Heavy-duty canister type with safety element
  • Gasoline
  • Electro-magnetic, 200 lb-ft (271 Nm) | Drive: V-belt
  • Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor
  • Hydrostatic
  • Dynamic: Twin levers
  • Internal wet disk integrated in the transmission | actuation: Hand brake
  • Drive: 24x9.5-12
  • 24x12-12 (54 in., 60 in.) | Load rating: 4 PR
  • type: Flat free | size: 13x6.5-6 | Front anti-scalp rollers: RH, center, LH
  • 12 V
  • 20 amp
  • Cold cranking amp: 300 amp
  • Speed range: 0-10 mph (0-16.1 km/h) | Travel, Forward: 0-10 mph (0-16.1 km/h) | Travel, Reverse: 0-4.5 mph (0-7.2 km/h)
  • Speed and direction control: Twin levers | Filter: Internal, replaceable
  • Blades, Tip Approximately: 18,000 fpm (5,486 m/min)
  • 1.1-1.9 U.S. gal./hr (4.2-7.2 L/hr) Under normal conditions, load, operation, and dependent on loads and operating conditions
  • 7-Iron PRO, one-piece stamped steel with reinforcements
  • 7 gauge 0.18 in. (4.6 mm)
  • Side, MOD
  • Blades Thickness: 0.25 in. (0.64 cm) | Mower deck: 48 in (122 cm)
  • With chute down: 62 in (157 cm)
  • 0.25 in. (0.64 cm), 1-5.5 in. (2.54-14 cm)
  • 73 in. (185 cm)With ROPS down: 47 in. (119 cm)
  • 48 in (122 cm)
  • 84 in. (213 cm) | Blades: Varies by deck size
  • 5.9 U.S. qt (5.6 L) | Crankcase With filter: 2 U.S. qt (1.9 L)
  • 11.5 U.S. gal. (43.5 L)
  • 1,220 to 1,283 lb (553 to 582 kg)
  • Fuel tank switch/shut-off valve | Hour meter: Standard, digital | Operator presence starting system: Brake-N-Go (hand)
  • Three
  • 36 months or 1200 hours, whichever comes first, First 24 months, no hour limitation