Information
- Operators Station:Cab Enclosure
- Operators Station:A/C
- Operators Station:Hand Controls
- Operators Station:EH Controls
- Operators Station:Air Ride Seat
- Operators Station:Hi-Flo
- Attachments:Aux Hydraulics
- Powertrain:Ride Control
- Powertrain:2 Speed
- Booms:Self-Leveling
- Tracks:Wide Rubber Tracks
- Buckets:84" Bucket
- Description: 2 Speed, Hi Flow, Self Leveling, Ride Control, Cab, Heat and A/C, Radio, Air Ride Seat, Severe Duty Cab Door, ISO Switchable Joystick Controls, Power Quick Tach, Wide Zig Zag Tracks, Cold Start Package, 3 Sets of Counterweights, 84" Bucket with Edge
Highlights
- $93,500.00
- Washington
- Pre-Owned
- 143342
- 2023
- John Deere
- 333G
- 1T0333GMHPF441298
- 4TNV94FHT
- 210
- Available
- No Bucket: 80.7 inches (2050 mm)
- Top Of Cab: 86.7 inches (2200 mm) | to Hinge Pin: 132 inches (3350 mm) | Dump Height - Maximum Foundry: 106.1 inches (2690 mm)
Specifications
- 2023
- John Deere
- 333G
- Base
- General
- 4TNV94FHT
- Yanmar
- EPA Tier 4 / EU Stage IV
- Turbo. Intercooled
- 186.3 Inches³ (3.1 ltr)
- Output Net: 96.6 hp (72 kW) / Output - Gross: 100 hp (74.6 kW) | Hydraulic Power: 50 hp (37.29 kW)
- 2500 rpm
- 291.3 lbf / ft (395 Nm)
- Tipping Load - Foundry: 10570 lbs (4799 kg) | Breakout - Lift Foundry: 8250 lbf (36.6 kN) | Breakout - Bucket Foundry: 13750 lbf (61.1 kN)
- 7.8 mph (12.6 kph)
- Bearing: 5 PSI (34.1 kPa)
- 3450 PSI (237.87 bar)
- 25 gallons (US) / min (95 lt/min)
- Rear Departure Angle: 31 Degrees | Dump Angle: 48 Degrees | Rollback - Ground Level: 35 Degrees
- Shoe: 17.7 inches (450 mm)
- No Bucket: 122 inches (3100 mm) | Foundry Bucket: 146 inches (3710 mm)
- No Bucket: 80.7 inches (2050 mm)
- Top Of Cab: 86.7 inches (2200 mm) | to Hinge Pin: 132 inches (3350 mm) | Dump Height - Maximum Foundry: 106.1 inches (2690 mm)
- 9.4 inches (240 mm)
- 30 gallons (US) (114 ltr)
- Rated Operating Capacity - Foundry: 3700 lbs (1680 kg)
- Foundry: 12100 lbs (5493 kg)
