2020 John Deere Z915E

Selling Price -

$7,750.00

Information

  • Width:54 in
  • Engine Type:Gas
  • Description: 54" Deck, Gas Engine, Hydrostatic Transmission, Pneumatic Tires, ROPS

Photos

Highlights

  • $7,750.00
  • HOUGHTON
  • Pre-Owned
  • 145846
  • 2020
  • John Deere
  • Z915E
  • TC915EV080882
  • Model: CV742
  • 25
  • 201
  • Hydrostatic
  • Gasoline
  • Available
  • With chute down: 62 in (157 cm) / 68 in (173 cm) / 74 in (188 cm)
  • Of-cut range, Increments: 0.25 in. (0.64 cm), 1-5.5 in. (2.54-14 cm) | With ROPS up: 73 in. (185 cm) | With ROPS down: 47 in. (119 cm)

Specifications

  • 2020
  • John Deere
  • Z915E
  • Base
  • Zero-Turn Mower
  • Model: CV742
  • At 3,600 rpm: 25 hp (18.6 kW)
  • 45.6 cu in. (747 cc)
  • Two
  • Full flow, replaceable
  • Full pressure
  • Air
  • Pre-cleaner, Yes, Heavy-duty canister type with safety element
  • Gasoline
  • Electro-magnetic, 200 lb-ft (271 Nm) | Drive: V-belt
  • Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor
  • Hydrostatic
  • Dynamic: Twin levers
  • Internal wet disk integrated in the transmission | actuation: Hand brake
  • Load rating: 4 PR | Drive: 24x9.5-12 (48 in.) / 24x12-12 (54 in., 60 in.)
  • Type: Pneumatic Front | size: 13x5-6 | Front anti-scalp rollers: RH, center, LH
  • 12 V
  • 15 amp
  • Cold cranking amp: 300 amp
  • Fuel consumption: 1.1-1.9 U.S. gal./hr (4.2-7.2 L/hr) Under normal conditions, load, operation, and dependent on loads and operating conditions
  • Range: 0-10 mph (0-16.1 km/h) / Forward: 0-10 mph (0-16.1 km/h) / Reverse: 0-4.5 mph (0-7.2 km/h) | Blade tip Approximately 18,000 fpm
  • 7 gauge 0.18 in. (4.6 mm)
  • Blades Thickness: 0.25 in. (0.64 cm) | Mower deck: 48 in. (122 cm) / 54 in (137 cm) / 60 in. (152 cm)
  • With chute down: 62 in (157 cm) / 68 in (173 cm) / 74 in (188 cm)
  • Of-cut range, Increments: 0.25 in. (0.64 cm), 1-5.5 in. (2.54-14 cm) | With ROPS up: 73 in. (185 cm) | With ROPS down: 47 in. (119 cm)
  • 48 in. (122 cm) / 54 in (137 cm) / 60 in. (152 cm)
  • 84 in. (213 cm) | Blades: Varies by deck size
  • Crankcase With filter: 2 U.S. qt (1.9 L)
  • 5.9 U.S. qt (5.6 L)
  • 11.5 U.S. gal. (43.5 L)
  • 1,100 to 1,178 lb (499 to 534 kg)
  • Fuel tank switch/shut-off valve | Hour meter: Standard, digital | Operator presence starting system: Brake-N-Go (hand)
  • One-piece stamped steel with reinforcements
  • Side
  • Three
  • 36 months or 1200 hours, whichever comes first, First 24 months, no hour limitation