Transfer Continuous: 250 hp (186 kW) / Peak: 300 hp (224 kW) / Center Continuous: 125 hp (93 kW) / Peak: 225 hp (168 kW) / Outer Continuous: 125 hp (93 kW) Peak: 225 hp (168 kW)
Blade tip: 540 RPM (79.2 m/s 259.8 fps) / 1000 RPM (80.5 m/s 284 fps)
Standard self-level hitch clevis with 22.5-in. (57.2-cm) narrow-profile width / Ball-type self-level hitch with 22.5-in. (57.2-cm) narrow-profile width and 2-degree rotation freedom to each side | Swivel hitch | Jackstand: Mechanical jackstand in base for all machines. Hydraulically operated height, stays vertical while raising/lowering.
7 gauge - (4.55 mm 0.18 in.) | Shirt: 3 gauge - (6 mm 0.24 in.)
Cutting Capacity: 4 in. (101.6 mm) | With hammer blade: 5 in. (127 mm) | Blades Thickness: 0.5 in (13 mm) | Blade Overlap: 6 in. (152 mm) | Wing flex: For transport: upward 90 degree (angle) / Working angles: upward 45 degree (angle) / Downward 22 degree (angle)
15 ft (4.6 m)
Cutting: 1-16 in. (25.4-406.4 mm)
Cutting chamber: 10 in. (254 mm)
9.1 ft (2.8 m) at wing wheels
15.4 ft (4.7 m)
17.3 ft (5.3 m)
maintenance-free single 1-in. (2.5-cm) diameter full-length hinge pin
Deck shape: Easy-clean dome-shaped top deck | Deck type: Single dome deck | Number of Gearcases: 4 | Blade Type: Suction | Blade holder Type: Round stump jumper and standard deck rings for maximum protection of blades and blade carrier against obstruction damage | Wing lift: Independent; includes spring assist unfolding
Hinges: Intermittent cast steel segments
Wing-leveling: Easy adjust turnbuckle with bearing
