2018 John Deere X370

Selling Price -

$3,000.00

Information

  • Width:42 in
  • Transmission:Hydro
  • Engine Type:Gas
  • Drive Type:2WD
  • Power Steering
  • Description: 42" Deck, Gas Engine, Hydrostatic Transmission, Power Steering

Photos

Highlights

  • $3,000.00
  • Muscatine
  • Pre-Owned
  • 147173
  • 2018
  • John Deere
  • X370
  • 1M0X370ACJM050726
  • 18
  • 286
  • Gasoline
  • Available
  • Mower cut: 13 positions, 1-4 in. 2.5-10.2 cm | Cut Increments: 0.25 in. 0.64 cm | Preset Cut: Yes

Specifications

  • 2018
  • John Deere
  • X370
  • Base
  • Riding
  • 18.5 hp (13.8 kW)
  • 36.8 cu in. (603 cc)
  • FS600V
  • Overhead valve, full-pressure lube, oil filter
  • V-twin, cast-iron liners
  • Mechanical
  • /Speed Control: Separate levers, automatic choke return
  • Air
  • Dry, replaceable with foam precleaner
  • Drain: No tools | Cooler: Fins and fan on transaxle
  • K57 hydrostatic integrated with transaxle
  • Twin Touch™ pedals | Cruise: Yes, button on dash
  • Internal, Replaceable
  • Forward: 0-5.8 mph (0-9.3 km/h) | Reverse: 0-3.5 mph (0-5.6 km/h)
  • Mower: Electric power take-off (PTO) clutch, in-line belt | Mower attachability: Single belt
  • Delivery: Pulse pump, carburetor
  • Gasoline
  • Gauge on dash
  • Tank: 3.3 U.S. gal. (12.5 L) | Tank Location: Rear | Fill Opening: On left fender, 3 in. 7.6 cm
  • 12 V (340 CCA)
  • Flywheel alternator, regulated, 15 amp
  • Engine: Bendix
  • Two standard, incandescent, 27 W
  • Internal wet disc
  • 15x6-6
  • 20x10-8
  • Large, 14 in. 35.6 cm
  • Mower: Two | Mower Adjustment: Four-position, tool required
  • Welded heavy-duty
  • Cast iron front axle, front wheel ball bearings
  • Bushings: Metal, Replaceable
  • Hood: Molded-in color hood material reduces sound, will not rust or dent | Fender Deck: Stamped steel | Mower: Stamped steel deck shell
  • Mower Deck Material: 12 gauge 0.105 in. 2.7 mm
  • 22 in. 55.9 cm | Uncut Circle: 30 in. 76 cm
  • Back: 15 in. 38.1 cm
  • Mower cut: 13 positions, 1-4 in. 2.5-10.2 cm | Cut Increments: 0.25 in. 0.64 cm | Preset Cut: Yes
  • 42 in. (107 cm)
  • On fender and under seat
  • Bracket: Standard rear
  • Hourmeter: Yes | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Service interval decal: Yes | Cup holder: Yes | Equipment mounting: Yes, heavy duty | Mower Type: Side discharge | Mower wash port: Yes | Mower attachability Type: Slide under tractor
  • Power, hydraulic
  • Open-back design with grasp
  • Fore-aft: While seated, slide rail, 14-position, 7 in. 17.8 cm | Mower level: Exact Adjust ports and onboard deck-leveling gauge
  • Seat: Tilt, two coil springs, three-position no-tools adjustment for operator weight
  • Hydraulic
  • Front Arms: Attached with spring pins at two points | Rear Arms: Two pins and spring clips
  • U.S.: 4 year/300 hour bumper-to-bumper