John Deere PowerTech 9.0 L (549 cu. in.) 6 Cylinder Tier 4/Stage V Compliant Diesel Engine
227.1 L/min (60 gpm) Hydraulic Pump
Five Premium Rear Remote SCVs with Electrohydraulic (EH) Controls, Premium Couplers, and High Pressure Relief Levers
45 mm (1-3/4 in.) 1,000 rpm (20-spline) PTO
9,072 kg (20,000 lb) capacity 3-Point Hitch (Cat 4N/3) Hitch with Sway Blocks and Quik-Coupler
Category 4 adjustable Swinging Drawbar with 50 mm (2 in.) Pin with heavy duty support
120 mm (4.72 in.) diameter by 3010 mm (118.5 in.) length with Double Taper Wheel Hubs
480/80R50 159B R1W Radial in Dual Wheel Configuration
Firestone Brand Only
ILS with hydraulic differential lock, wet multi-disk brakes, fully-enclosed driveline and Group 48 Rear Tires
420/85R34 147B R1W Radial in Dual Tire Configuration - Eight Position
Premium Lighting
Fenders, Pivoting Front - 480 mm (18.9 in.) Wide
Fender, Rear Extensions 2.75 m (108 in.) Width
Ethernet Switch
Leather Comfort Package
Outside Mirrors - Power Telescoping, Heated, Electrically Adjustable Right-hand and Left-hand
Antenna Mount and Wiring for Business Band (2-Way) Radio
Cold Weather Start Kit
Auxiliary Hydraulic Connections - 1/2 in.
Trailer Brake, Dual Line Hydraulic
Battery Disconnect
Weight, front support with twenty-two suitcase weights
One Pair 625 kg (1378 lb)
One Pair 72 kg (159 lb) Starter Weights and One Pair 205 kg (452 lb) Weights for Outer Rear Dual
Description: IVT 50K, 10in Touch Display, AT Activation, Premium Cab and Radio with Active Seat, 60 GPM Pump, 5-SCV, ILS, 4850/80R50D, 420/85R34D, LED Lights, Front and Rear Fenders, E-Mirrors, Business Band, Cold Weather Package, Auxiliary Connect, Battery Disconnect, Weights, Leather Trim, Hydraulic Trailer Brakes
John Deere AutoPowr™ IVT™ 0.030-26 mph (0.050-42 km/h): 42 km/h at 1,360 ECO erpm with group 49 tires, 42 km/h at 1,434 ECO erpm with group 48 tires, 42 km/h at 1,511 ECO rpm with group 47 tires
Electronically controlled, high-pressure commonrail with electric fuel transfer pump (self priming) | Required: Ultralow sulfur diesel (B20 diesel compatible)
Available
Specifications
2018
John Deere
8370R
Base
Row Crop
at 2100 rpm (97/68EC): 370 hp (272 kW) | Max at 1900 rpm (97/68EC): 407 hp (299 kW)
John Deere PowerTech™ PSS 9.0 L
2,100 rpm
Diesel
in-line, 6, wet-sleeve with 4 valve-in-head
Dual series turbocharger with fixed geometry first stage, variable geometry second stage; air-to-air aftercooling and cooled exhaust gas recirculation
Dual-stage with engine cooling fan aspiration
549 cu. in. (9.0 L)
16.0:1
Full-pressure, full-flow filtration with bypass
Replaceable cartridge-style oil filter
4.66 in. (118 mm)
5.35 in. (136 mm)
Two-stage with water separator and serviceindicator light | Filter, primary: 10 micron spin-on element with water indication sensor and drain | Filter, secondary: 2 micron spin-on element
Electronically controlled, high-pressure commonrail with electric fuel transfer pump (self priming) | Required: Ultralow sulfur diesel (B20 diesel compatible)
PTO: 39%
at 2,100 rpm: 313 hp (233 kW) | 1 3 /4 in. (44 mm) 20-spline, 1,000 rpm | 1,000 PTO rpm at 2,003 engine rpm, 1,000 ECO PTO rpm at 1,596 engine rpm, and 540 PTO rpm at 1,817 engine rpm for PST, 1,000 PTO rpm at 2,000 engine rpm, 1,000 ECO PTO at 1,594 engine rpm, and 540 PTO rpm at 1,814 engine rpm for IVT
Bulge: 10%
John Deere AutoPowr™ IVT™ 0.030-26 mph (0.050-42 km/h): 42 km/h at 1,360 ECO erpm with group 49 tires, 42 km/h at 1,434 ECO erpm with group 48 tires, 42 km/h at 1,511 ECO rpm with group 47 tires
Closed-center, pressure and flow compensated | Selective control valves (SCVs) with 1 /2 in. ISO couplers: 4
Main, axial piston (displacement): 85cc
2,958 (+/- 4.4) psi (20,400 +/- 300 kPa)
Rated flow, 85 cc pump: 60 U.S. gpm (227.1 L/min) | Rated flow, Dual Pump 85cc plus 35cc: 85 U.S. gpm (321 L/min)
/Battery:200 amps/12 Volt
Two batteries in parallel | Total cold-cranking amps: 1850 (2-925CCA grp 31 batteries)
Group 47/48/49 tires Available as Singles/Duals/Triples. See dealer for tire size selection and limitations
rear final drives: Inboard planetary three pinion | Rear: Rack-and-Pinion axle | Front: Independent Link Suspension (ILS), tread range 60 to 144 in. (1524 to 3657 mm) | Independent Link Suspension (ILS), suspension trave: Plus or minus 4.92 in. (125mm) at tread centerline for 5 step ratio axle at 1880mm tread |Front axle, 1500 Series MFWD: Full-locking electrohydraulic (actuated at same time as rear diff-lock) | Front axle, ILS: Full-locking electrohydraulic (actuated at same time as rear diff-lock) | Rear axle: Full-locking electrohydraulic
MFWD/ILS: 121.3 in. (3080 mm) / 120.1 in. (3050 mm) | MFWD/ILS: axle clearance 27 in. (686 mm) / 23.2 in. (590 mm)
Hydraulic power
170.4 gal (645L) with Group 47/48 tires | 181.2 gal (686L ) with Group 49 tires
3 Point rear: Lower draft shaft bending bar, electrohydraulic sensing |Category 4N/3 with Quik-Coupler - 120mm Axle Required: 20,000 lb. (9,702 kg)) - Maximum Lift Capacity 26,307 lb (11,933 kg) | 3 Point Front: 11,464 lb (5,200 kg)
DEF: 6 U.S. gal (23L)
ILS: 33,091 lb (15,009 kg)
AutoTrac™ Ready | ServiceADVISOR™ Remote: Requires activated JDLink service | CommandCenter™ Display video with 4600 Processor: Video capable; four video inputs (Tyco Connector PN 776536-1) for camera with PAL or NTSC signal
