Back

2018 John Deere X370

MoreLess
Limited Time Offer!

Selling Price -$3,000.00
No Images Available

Selling Price -

$3,000.00

HD Certified Pre-Owned
  • Width:42 in
  • Transmission:Hydro
  • Engine Type:Gas
  • Drive Type:2WD
  • Power Steering
  • Description: 42" Deck, Gas Engine, Hydrostatic Transmission, Power Steering
  • 2018
  • John Deere
  • X370
  • Base
  • Riding
  • 18.5 hp (13.8 kW)
  • 36.8 cu in. (603 cc)
  • FS600V
  • Overhead valve, full-pressure lube, oil filter
  • V-twin, cast-iron liners
  • Mechanical
  • /Speed Control: Separate levers, automatic choke return
  • Air
  • Dry, replaceable with foam precleaner
  • Drain: No tools | Cooler: Fins and fan on transaxle
  • K57 hydrostatic integrated with transaxle
  • Twin Touch™ pedals | Cruise: Yes, button on dash
  • Internal, Replaceable
  • Forward: 0-5.8 mph (0-9.3 km/h) | Reverse: 0-3.5 mph (0-5.6 km/h)
  • Mower: Electric power take-off (PTO) clutch, in-line belt | Mower attachability: Single belt
  • Delivery: Pulse pump, carburetor
  • Gasoline
  • Gauge on dash
  • Tank: 3.3 U.S. gal. (12.5 L) | Tank Location: Rear | Fill Opening: On left fender, 3 in. 7.6 cm
  • 12 V (340 CCA)
  • Flywheel alternator, regulated, 15 amp
  • Engine: Bendix
  • Two standard, incandescent, 27 W
  • Internal wet disc
  • 15x6-6
  • 20x10-8
  • Large, 14 in. 35.6 cm
  • Mower: Two | Mower Adjustment: Four-position, tool required
  • Welded heavy-duty
  • Cast iron front axle, front wheel ball bearings
  • Bushings: Metal, Replaceable
  • Hood: Molded-in color hood material reduces sound, will not rust or dent | Fender Deck: Stamped steel | Mower: Stamped steel deck shell
  • Mower Deck Material: 12 gauge 0.105 in. 2.7 mm
  • 22 in. 55.9 cm | Uncut Circle: 30 in. 76 cm
  • Back: 15 in. 38.1 cm
  • Mower cut: 13 positions, 1-4 in. 2.5-10.2 cm | Cut Increments: 0.25 in. 0.64 cm | Preset Cut: Yes
  • 42 in. (107 cm)
  • On fender and under seat
  • Bracket: Standard rear
  • Hourmeter: Yes | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Service interval decal: Yes | Cup holder: Yes | Equipment mounting: Yes, heavy duty | Mower Type: Side discharge | Mower wash port: Yes | Mower attachability Type: Slide under tractor
  • Power, hydraulic
  • Open-back design with grasp
  • Fore-aft: While seated, slide rail, 14-position, 7 in. 17.8 cm | Mower level: Exact Adjust ports and onboard deck-leveling gauge
  • Seat: Tilt, two coil springs, three-position no-tools adjustment for operator weight
  • Hydraulic
  • Front Arms: Attached with spring pins at two points | Rear Arms: Two pins and spring clips
  • U.S.: 4 year/300 hour bumper-to-bumper
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $3,000.00
  • Muscatine
  • Pre-Owned
  • 147173
  • 2018
  • John Deere
  • X370
  • 1M0X370ACJM050726
  • 18
  • 286
  • Gasoline
  • Available
  • Mower cut: 13 positions, 1-4 in. 2.5-10.2 cm | Cut Increments: 0.25 in. 0.64 cm | Preset Cut: Yes

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.